View HLMA-QH00-S0011_201021.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Standard SMT and Through Hole Lead Bend Options for Subminiature LED Lamps Technical Data
Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S Features
* Surface Mount Lead Configurations * Right Angle Lead Bend for Through Hole Mounting * Tape and Reel in Accordance with ANSI/EIA RS-481 Specifications
Ordering Information
To order Subminiature Lamps packaged with these standard options, include the appropriate option code along with the device catalog part number. Example: to order the HLMP-6300-F00xx with Option 11 gull wing leads in 12 mm embossed tape on 178 mm (7 inch) diameter reels, with 1500 lamps per reel; order as follows: HLMP-6300-F0011. Order quantities must be placed in reel increments only. Orders for partial reels will not be accepted. For additional information, please contact your local Agilent Technologies sales office or franchised distributor for assistance. HLMX-xxxx- x x x x x Packaging Option Color Bin Selection Max. Iv Bin
Description
Subminiature lamps (HLMx-Pxxx, HLMX-Qxxx, HLMP-6xxx, HLMP70xx) are available with the above standard options. Subminiature Lamps with Options 11, 12, 21, 22, 31, and 32 are suitable for surface mount applications and their leads are formed with gull wing, yoke bend and Z bend respectively. They are available in Tape and Reel (compatible to ANSI/EIA RS-481) or bulk. Options 1L, 1S, 2L, and 2S are right angle lead bends suitable for through hole applications.
Min. Iv Bin 4 x 4 Prod. Part Number
2
Selection Guide
Option Code 11 12 14 21 22 24 31 32 34 1L 1S 2L 2S Package Outline Drawing A, H, K, L
Package Configuration Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, 1500 Parts per Reel[1] Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts[2] Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel[1] Yoke Leads, 12 mm Tape on 7 in. Dia. Reel 1500 Parts per Reel[1] Yoke Leads, Bulk Packaging, Quantity of 500 Parts[2] Yoke Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel[1] Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel 1500 Parts per Reel[1] Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts[2] Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel, 6000 Parts per Reel[1] 2.54 mm (0.100 inch) Long Leads; 10.4 mm (0.410 in.) Center Lead Spacing Short Leads; 3.7 mm (0.145 in.) 5.08 mm (0.200 inch) Long Leads; 9.2 mm (0.364 in.) Center Lead Spacing Short Leads; 3.7 mm (0.145 in.)
Surface Mount Lead Configurations
B, I, K, L
C, J, K, L
Right Angle Lead Bends for Through Hole Mounting
D E F G
Notes: 1. SMT lamps are supplied in 12 mm embossed carrier tape. Minimum order is for one full reel, either 7 inch or 13 inch. All other order quantities must be in reel increments only. Orders for partial reels are not accepted. 2. Vapor barrier bags are used for bulk packaging.
3
Package Dimensions, Lead Bend Options
(A) Gull Wing Lead, Option 11, 12, and 14
CATHODE
ANODE
3.81 (0.150) MAX.
0.13 (0.005) R TYP. 0.79 (0.031) 0.53 (0.021)
0.13 (0.005) MAX.
CATHODE STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
(B) "Yoke" Lead, Options 21, 22, and 24
CATHODE STRIPE
0.33 (0.013) R. TYP. 3.45 (0.136) NOM. 1.07 (0.042) TYP.
0.13 (0.005) TYP.
0.79 (0.031) 0.53 (0.021)
7.62 (0.300) MAX.
CATHODE
ANODE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
4
(C) Z-Bend Lead, Option 31, 32, and 34
CATHODE STRIPE
4.06 (0.160) 4.57 (0.180) 0.79 (0.031) 0.53 (0.021)
3.05 (0.120) NOM. 5.59 (0.220) 6.10 (0.240)
0.76 (0.030) 0.51 (0.020)
CATHODE
ANODE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
(D) Rt. Angle Bend Option 1L
10.16 (0.400) 10.67 (0.420)
2.54 (0.100) NOM.
CATHODE STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
5
(E) Rt. Angle Bend Option 1S
3.43 (0.135) 3.94 (0.155)
2.54 (0.100) NOM.
CATHODE STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
6
(F) Rt. Angle Bend Option 2L
9.50 (0.374) 8.92 (0.351)
5.08 (0.200) NOM.
CATHODE STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
(G) Rt. Angle Bend Option 2S
3.43 (0.135) 3.94 (0.155)
5.08 (0.200) NOM.
CATHODE STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
7
Package Dimensions: Surface Mount Tape and Reel Options
(H) 12 mm Tape and Reel, Gull Wing Lead
PUSH PIN HOLE, GULL WING LEAD, DOME ONLY
NOTES: 1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE. 2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm. 3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO. 4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.
8
(I) 12 mm Tape and Reel, "Yoke" Lead
NOTES: 1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE. 2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm. 3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO. 4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.
9
(J) 12 mm Tape and Reel, Z-Bend Lead
D1
D1
A C N T
Reel Dimensions Per ANSI/EIA Standard RS-481. 7 inch Reel 178.0 2.0 (7.0 0.08) Dia. 13.0 (0.512) Dia. Typ. 50.0 (1.97) Min. 18.4 (0.72) mMax.
All Dimensions Are in Millimeters (Inches). 13 Inch Reel 330 (12.9) Dia. Max. 13.0 (0.512) Dia. Typ. 100.0 (3.93) Min. 18.4 (0.72) Max.
Embossed Carrier Tape Dimensions Per ANSI/EIA Standard RS-481. Gull Wing Dome D 1.55 (0.061 0.002) Dia. D1 1.0 (0.039) Dia. Min. D2 E F K0 P P0 P2 t 20.2 (0.795) Dia. Min. 1.75 0.1 (0.069) 3.05 0.1 (0.120) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 2.0 (0.079 0.002) 0.3 (0.012) Typ.
All Dimensions Are in Millimeters (Inches). Yoke and Z-Bend Flat Top 1.50 + 0.10 (0.059 + 0.004) Dia. N/A (No Push Pin Hole) 20.2 (0.795) Dia. Min. 1.75 0.1 (0.069) 3.05 0.1 (0.120) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 2.0 (0.079 0.002) 0.305 0.013 (0.0120 0.0005) 12.0 0.3 (0.472 0.012)
Gull Wing Flat Top 1.55 (0.061 0.002) Dia. N/A (No Push Pin Hole) 20.2 (0.795) Dia. Min. 1.75 0.1 (0.069) 2.54 0.1 (0.100) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 2.0 (0.079 0.002) 0.3 (0.012) Typ.
Yoke Dome Z-Bend Dome 1.55 (0.061 0.002) Dia. 1.50 + 0.10 (0.059 + 0.004) Dia. N/A (No Push Pin Hole) 1.50 + 0.25 (0.059 + 0.010) 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 1.75 0.1 (0.069) 1.75 0.1 (0.069)
5.50 0.05 (0.217 0.002) 3.05 0.1 (0.120) Typ. 2.97 0.1 (0.117) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 2.0 (0.079 0.002) 2.0 (0.079 0.002) 0.3 (0.012) Typ. 0.305 0.013 (0.0120 0.0005) W 12.0 0.3 (0.472 0.012) 12.0 0.3 (0.472 0.012) 12.0 0.3 (0.472 0.012) 12.0 0.3 (0.472 0.012)
10
(K) 12 mm Tape and Reel
PART:
Storage Condition: 5 to 30C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been opened for more than 1 week Baking recommended condition: 60 5C for 20 hours.
PART:
LOT NO:
LOT NO:
QTY: QTY: D/C: EXC: TAPE DATE: TAPE DATE: QA INSP: QA INSP:
C/O:
C/O:
11
(L) Recommended Reflow Soldering Profile and Soldering Pad Pattern for SMT Options
10 SEC. MAX. +5 230 C MAX. -0 3C/SEC. MAX. 183C 125-170C 3-4C/SEC. 2-3C/SEC. 120 SEC. MAX. TIME 60-150 SEC. 50C 25C
0.89 (0.035)
0.45 (0.018)
TEMPERATURE
0.89 (0.035) 1.78 (0.070) 3.58 (0.140)
0.45 (0.018)
Recommended Reflow Soldering Profile. Wait until device has cooled to room temperature before handling.
Recommended Soldering Pad Pattern for Gull Wing Leads 11, 12, and 14.
#27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD 1.27 (0.50) 0.45 (0.018) 0.89 (0.035)
#27 DRILL 3.73 (0.147) DIA. CLEARANCE HOLE THROUGH PC BOARD 1.27 (0.50) 0.89 (0.035)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
0.64 (0.025)
0.45 (0.018)
3.30 (0.130) 6.60 (0.260)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
3.30 (0.130) 6.60 (0.260)
Recommended Soldering Pad Pattern for Yoke Leads 21, 22, and 24.
Recommended Soldering Pad Pattern for Z-Bend Leads 31, 32, and 34.
www.semiconductor.agilent.com Data subject to change. Copyright (c) 2001 Agilent Technologies, Inc. April 19, 2001 Obsoletes 5980-2003E (8/00) 5988-0363EN

▲Up To Search▲

Price & Availability of HLMA-QH00-S0011

	To Download HLMA-QH00-S0011 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .